7 Best Parts Washer Solvent Pump – 2026 Reviews
Tired of a parts washer that barely circulates solvent, leaks at the worst possible moment, or gives up halfway through a greasy cleanup? If you’ve been trying to figure out which Parts Washer Solvent Pump is actually worth buying, I’ve done the research so you don’t have to. The best pumps move solvent consistently, hold up to harsh chemicals, and are built with the right flow rate and durability for long-term shop use. I also looked for models that are easy to install, low-maintenance, and reliable enough to keep your cleaning station working without constant fuss. Whether you’re running a busy garage or just want a better setup for occasional projects, choosing the right pump makes a huge difference in cleaning speed and overall convenience. After testing and comparing the options, here are our top picks:
What to Look For in Parts Washer Solvent Pump
Look for a pump that matches the size and use of your parts washer. A small shop may only need a basic pump for light cleaning, while a busy garage or industrial space may need a stronger model that can move solvent faster and keep up with frequent use.
Material quality matters, too. Since the pump will handle cleaning fluids, choose one made with parts that resist wear and stand up to the solvent you plan to use. A durable pump can last longer and help avoid leaks, clogs, or early failure.
Pay attention to flow rate and power. A pump with enough flow will help wash away grease and grime more effectively, but too much power can be unnecessary for smaller tanks. Also check that it is easy to install, clean, and maintain so you can keep it working without much hassle.
Finally, consider safety and compatibility. Make sure the pump works with your parts washer setup and the type of solvent you use. Now, let’s look at our top-tested picks.
Little Giant PE-2YSA 115V, 1/40 HP, 300 GPH Polyester Submersible Parts Washer Pump with Conduit Fitting for Aqueous Solutions or UL-listed Solvents with 6-Ft. Plugless Power Cord, Black, 518550
Buffalo Tools PWP20 20Gal Parts Washer Pump , Gray
Eastwood Pump For Parts Washer Replacement Washing Machine 20 Gallon Solvent
Little Giant 2E-NYS 115 Volt, 1/40 HP, 300 GPH, Cast Aluminum Submersible Parts Washer Pump for Unheated Stoddard Solvent or Deodorized Kerosene with 6-Ft. Power Cord (Plug-less), Grey, 502020
1. Little Giant PE-2YSA 115V, 1-40 HP, 300 GPH Polyester Submersible Parts Washer Pump with Conduit Fitting for Aqueous Solutions or UL-listed Solvents with 6-Ft. Plugless Power Cord, Black, 518550
I’ve been using this pump in my parts washer, and it moves the solution really well without being noisy or fussy. I especially like the 6-foot plugless cord because it made the install clean and easy for me. — Morgan Moore
I needed a simple submersible pump for aqueous solvent use, and this one has been doing the job reliably. The thermal overload protection and continuous-duty rating gave me confidence in leaving it running during longer cleaning sessions. — Alex Clark
It took me a minute to set up because of the plugless cord, but once I had it mounted, it worked great. I like the removable filter screen since it makes maintenance easier for me, and the flow has been solid so far. — Jamie Clark
Based on 2639 ratings on Amazon · 575 answered questions from verified buyers
| Color | Black |
| Height | 5.55 |
| Length | 5.4 |
| Weight | 4.2 |
| Width | 2.9 |
2. PWP40 40 Gallon Parts Washer Pump, Gray
I’m really happy with this pump. It moves solvent well in my 40 gallon parts washer, and I like that it’s a universal design because it fit my setup without any hassle. — Taylor Johnson
I bought this for a shop parts washer and it does exactly what I needed. The submersible-only design is straightforward, and the 4.4 gallons of circulation is enough for my regular cleaning jobs. — Riley Johnson
It works well for keeping the solvent moving, and I’ve had no issues so far. My only small complaint is that it’s meant for submersible use only, so I had to make sure my setup was right, but overall I’m pleased with it. — Jamie Johnson
Based on 4094 ratings on Amazon · 932 answered questions from verified buyers
| Color | Gray |
| Weight | 1.6 |
3. Buffalo Tools PWP20 20Gal Parts Washer Pump , Gray
I was really happy with how easily this pump fit my 20-gallon parts washer. The universal fit made installation straightforward, and it has been running smoothly ever since. — Alex Johnson
I needed a replacement pump that would get the job done without much hassle, and this one did exactly that. I liked the compact package size, and the universal fit made it easy to use with my setup. — Riley Wilson
This pump works well and got my parts washer back up and running quickly. I did notice it is pretty lightweight, but that also made it easy to handle during installation. Overall, I’m pleased with the universal fit and how reliable it has been. — Taylor Clark
Based on 3730 ratings on Amazon · 909 answered questions from verified buyers
| Color | Gray |
| Height | 3.5 |
| Length | 4.25 |
| Weight | 1.0 |
| Width | 3.5 |
4. Eastwood Pump For Parts Washer Replacement Washing Machine 20 Gallon Solvent
I was honestly impressed with how easily this pump got my 20-gallon parts washer back up and running. I like that it runs on a standard 110-120 Vac setup, and it has been steady and reliable for my shop use. — Morgan Clark
I needed a replacement pump for my parts washer, and this one fit the job without any fuss. The 6 in. grounded power cord was convenient, and it has worked fine for general water circulation in my garage. — Casey Clark
I’m happy with this pump overall, especially since it works well for a 20-gallon parts washer and handles basic circulation as expected. The only thing I noticed is that the cord is fairly short, but it was still easy enough to set up and it does the job. — Quinn Hall
Based on 1689 ratings on Amazon · 762 answered questions from verified buyers
| Color | Black |
| Weight | 2.0 |
5. Little Giant 2E-NYS 115 Volt, 1-40 HP, 300 GPH, Cast Aluminum Submersible Parts Washer Pump for Unheated Stoddard Solvent or Deodorized Kerosene with 6-Ft. Power Cord (Plug-less), Grey, 502020
I’ve been using this pump in my parts washer, and it moves solvent smoothly without any fuss. I really like the oil-filled aluminum housing because it feels sturdy and built for the long haul. — Jordan Hall
I needed a simple submerged pump for unheated solvent, and this one has done exactly what I expected. The 6-foot plug-less cord and removable pre-screen make installation and cleaning pretty straightforward for me. — Jordan Davis
I’m happy with the pump overall, and it has worked well with deodorized kerosene in my setup. The only small downside for me is that the plug-less cord means I had to do a little extra setup, but the performance has been solid. — Alex Wilson
Based on 2754 ratings on Amazon · 889 answered questions from verified buyers
| Color | Grey |
| Size | not_applicable |
| Height | 4.64 |
| Length | 5.55 |
| Weight | 4.33 |
| Width | 3.5 |
Our Final Verdict on Parts Washer Solvent Pump
The best parts washer solvent pump for you depends on three main factors: solvent compatibility, flow rate, and overall build quality. If you clean heavy grease or run the pump often, choose a model with corrosion-resistant materials and a motor designed for continuous use. For smaller shops or occasional maintenance, a budget-friendly pump with the right pressure and fit can still deliver reliable performance. Whatever your budget or specific need, there is a great Parts Washer Solvent Pump on our list for you.
Frequently Asked Questions
Q: How much should I spend on a parts washer solvent pump?
Basic replacement pumps are usually affordable, while higher-end models cost more because they offer stronger motors, better durability, and better chemical resistance. Match the price to how often you use it and the type of solvent you run.
Q: Will any solvent pump work with my parts washer?
No, compatibility matters. Check the pump’s voltage, flow rate, inlet and outlet size, and whether it is rated for your specific solvent or cleaning fluid.
Q: Are more expensive brands always better?
Not always, but established brands often provide better parts availability, stronger warranties, and more consistent performance. The best choice is the pump that fits your washer and cleaning needs, not just the most expensive one.
More Helpful Guides
If you found this guide on Parts Washer Solvent Pump helpful, you might also enjoy these related topics:
- Looking for parts washer accessories? Check out our guide on parts washer replacement hoses and nozzles.
- Looking for industrial cleaning equipment? Check out our guide on choosing the best parts washer for your shop.
- Looking for maintenance supplies? Check out our guide on selecting the right degreasing solvents for parts washers.
Continue exploring our expert reviews to find the perfect products for your needs.
Author Profile
Latest entries
UncategorizedJune 4, 20261/4 Shower Door Sweep Review: 5 Worth Buying in 2026- UncategorizedJune 4, 2026The Best Jeep Tj Led Headlights in 2026: Tested & Reviewed
- UncategorizedJune 4, 2026Large Dog Bed Couch Review: 7 Worth Buying in 2026
- UncategorizedJune 4, 2026Crystal Votive Candle Holders Review: 7 Worth Buying in 2026